View Products | Site Map | ProCustomer
1-866-PRO-MACH (776-6224)
Solutions & Services
Pro Mach Expands End of Line Capabilities and Case Packing Footprint with Acquisition of Edson Packaging Machinery
White Paper Describes How New Retorts Are Producing Aseptic Quality Food at a Fraction of the Cost
Allpax Introduces Innovative Waste-Steam Recovery System for Retorts
Pro Mach Names New Director of Corporate Business Collaboration
more…
This automatic vertical bulk packaging packager provides consistent-continuous production for items such as lottery pogs, bottle caps, puzzle pieces, and many other items that require bulk packaging. This packager is easily interfaced with scales, counters and/or feeders for automatic loading.
Wexxar's WF10 is a fully automatic case former / case erector that showcases an omni-handed feature which allows case packers to form both right-handed and left-handed cases on the same machine. The case forming / erecting equipment is great for customers with multiple product sizes.
The Model 10.61 incorporates LSI's renowned durability into an economically priced Print & Apply Tamp label applicator. Based on Sato's Lt408 print engine, the Model 10.61 prints text, barcodes and graphics, at speeds up to 6 IPS with a 203 DPI resolution, in both direct thermal and thermal transfer modes.
A wide range of applications are possible- high-speed, pick-and-place, sorting, and inter-plant routing. From pharmaceuticals to building products, Brenton Robotic Material Handling Systems are a great choice.
The Voyager is about half the size of automatic horizontal L-bar sealers and runs up to 60 packages/minute.
The Vertic-L is a small footprint vertical bagging solution that provides a reliable, versatile, and cost-effective alternative to pre-made bags for a wide variety of common and unusual shaped items.
The BEL 5150u was designed by combining the features of the BEL 505 semi-automatic case former and the BEL 150 pressure sensitive case taper to provide improved productivity, ergonomics and reduced costs - saving valuable floor space by eliminating cluttered packing lines and stacks of boxes littering the floor.
The fully automatic CE-30 vertical case elevator, formerly known as the Currie CE-3, is a small footprint machine that runs at speeds up to 30 cycles/minute. A fully Automatic design reduces labor costs and increases plant operating efficiency. It is available in two configurations to fit nearly any application.
The Citronix series of continuous ink jet printers are specially designed to print permanent lot codes, date codes, logos and text to any type of substrate; metal, glass, wood, plastic, paper and more.
The economical label applicators from ID Technology are a line of industrial label applicators that are rugged and accurate in both fixed and variable speeds. The Model 150, Model ST1000 and Model ST1000 Tamp are some of the economical label applicators offered.
The iCON laser coding system is an affordable and economical alternative to inkjet marking. The iCON laser coder has been specifically designed for small character coding applications in packaged goods and industrial products.
The WF20 is a fully automatic case former / case erector that comes with a tape head and toolless changeover features. The Pin & Dome technology offered by Wexxar is also included on this case forming / erecting equipment. The color-coded, tactile guide offers a friendly & convenient set-up.
ProSeries inkjet printers produce high resolution text, barcode, and graphic images up to 4" high and at 300 dpi print resolution on such surfaces as lumber, ceramic tile, and corrugate.
The Series 90TM High Speed Shrink Wrapper runs in continuous motion and designed for ease of access and fast changeovers as well as pack style flexibility.
The WSH is a fully automatic hot melt glue case sealer that works for a top seal only or for a top and bottom seal. The hot melt glue case sealer contains a stationary major flap folding and internal platen-compression system which makes sure the flaps are aligned for a perfect seal.
The Model 250 label printer applicator is the industry leading label printer applicator that will increase your manufacturing efficiency and productivity. Primary, secondary, top, bottom, wraparound, and multi-panel are among the label printer applicator options available.
The Label, Tag & Ribbon specialists from ID Technology provide you with consultation, in-house design, art re-origination, plate making, and full line printing capabilites for your company. All of our label, tag, and thermal transfer ribbon products come with the assurance of quality production and minimal lead times.
The fully automatic LLP low level infeed palletizer has been designed to provide a low-cost, heavy-duty, medium speed palletizer to palletizer more than 20 cases per minute onto GMA or CHEP pallets. The LLP is available in a right or left hand parallel infeed configuration and can have a side load or an end load pallet dispenser.
LSI's Series 1200 is a side panel labeling system which applies labels to a variety of objects that include square or rectangular boxes and cylindrical bottles or cans.
Wexxar offers the WST Fully Automatic, Pressure Sensitive Case Taper. The WST case taper equipment is a compact, versatile case sealer. This fully automatic, pressure sensitive case taper is used for top and bottom seals or for top seal only applications.
LSI offers the Series 20 print & apply labeling machine. This print & apply label equipment can come with a Sato or Zebra OEM print engine. The Series 20 print & apply labeler has different options depending on the printer model and printer speed you choose.
BEL offers the 505 semi-automatic case former / case erector and pack station which is designed specifically for application on manual case packing lines. The installation of the semi-automatic case former / case erector improves your productivity and minimizes manual labor.
The Model 301 is a semi-automatic, wrap around labeling system that applies labels on products such as bottles, vials, and cans. This semi-automatic labeling machine is compatible with the Series 20 Print & Apply Labeling Head and the Series 30 and Series 40 Apply Only Labeling Heads.
The Series 30 is an apply only labeling head that can accommodate 5" web widths, 12"and 16" diameter unwind rolls and is able to reach dispensing speeds up to 400" of label web per minute. The Series 30 is an easily convertible model and is also designed to work with any of LSI's standard applicators.
Slip Sheet Feeder for High Level Infeed Palletizers or Low Level Infeed Palletizers.
The Standard Pallet Dispenser from Currie by Brenton receives stacks of pallets from a forklift operator. A sweep chain removes the bottom pallet from the stack.
With no factory air required, the Compact 32d thermal transfer overprinter prints 32mm wide, 300 dpi logos, barcodes and text at up to 750 mm/s. Four ribbon save modes minimize running costs and downtime. A 650 meter ribbon has an effective length of 1625 meters when using the ribbon economy mode, while proven dancer arm technology eliminates ribbon breakage.
The Up Elevator transports pallets between floors to reduce forklift operation.
The E-Pac packager, is an all electric versatile, easy to use vertical packager featuring servo motor drives for film feed and seal assembly open/close. This uniquely designed packager allows the operator interface to control all packager functions.
The BEL 5252u is a unitized case packing and sealing system providing a more compact frame, a simplified case size range, and a competitive price.
A full range of CO2 laser coders is offered for permanent marking on a wide variety of substrates; including paper, cardboard, glass, and wood. The CO2 laser marking systems are able to print up to 4 lines of text for both high speed and static applications.
The Model 250C compact label printer applicator boasts the smallest footprint on the market today. These label printer applicators can be used in slow to moderate in-line applications and table top configurations.
The Model 250N is a corner wrap label printer applicator that was designed with floor space in mind, as it utilizes a narrow design. The Model 250N label printer applicator was also configured with the Model 250 modules.
The Down Elevator/Stacker transports pallets between floors to reduce forklift operations.
Pallets are loaded directly into the empty Currie by Brenton Enhanced Pallet Dispenser. When a pallet is needed, a set of lift arms and pallet supports are positioned at the same height as the second-from-the-bottom pallet.
The WF30 fully automatic case former / case erector is handled by the Pin & Dome technology and is able to handle common imperfections in the quality of corrugated. The case erecting / forming equipment is also available for pressure sensitive tape case sealers or hot melt glue forming.
The heat shrink wrapping tunnel features include speeds up to 80 cycles/min. They are made with high quality construction, four heat plenums feeding two heat zones with adjustable air flow, that include fully adjustable baffles in each plenum on the side and bottom.
The Series 40 high speed label applicator is ID Technology's performance line of stepper motor labeling heads. The Series 40 high speed label applicator includes models to accommodate 5" and 7" web widths, 12" and 16" diameter unwind rolls and user adjustable dispense speeds up to 1200" per minute.
The BEL 270 is a fully automatic hot melt glue case sealer. The hot melt glue case sealer is a continuous duty case sealer which is unmatched for compactness, quality of construction, safety and operating performance.
The KIP-Series of CO2 laser coders offers a reliable and flexible solution for clear and permanent marking on labels, cardboard, glass, PET, wood and more. For harsh environments the laser coder components and touch screen controller are enclosed in an airtight casing protecting the laser coder from both dust and water.
Marksman Duo Vx inkjet coding systems utilize proprietary integrated valve printheads for accurate, legible coding on porous and non-porous substrates. The inkjet coder requires minimal maintenance and is capable of printing at high line speeds.
The top panel labeling system offered by LSI is the Model 1300. This labeling system is designed for the top labeling of boxes, caps, and any other flat containers.
The BEL 130 is a semi automatic, bottom belt case taper that is designed for simple and convenient tape application. If you are currently hand taping your cases, the BEL 130 semi automatic, pressure sensitive case taper is an ideal investment.
Brenton Engineering offers robotic palletizers & robotic palletizing equipment for both single line systems & multiple feed lanes. These robotic palletizers are extremely reliable and incredibly quick changeovers.
This mixed layer robotic palletizing system is supported by a multi-zoned vacuum, clamp style or bag gripper which is engineered to meet the customer's robotic palletizing system requirements.
The Bel 505XL is an over sized semi-automatic case former / case erector and pack station. The BEL 505XL is based of the BEL 505 forming / erecting equipment, but allows for large dimension cases or boxes. This equipment is very easy to operate and make adjustments to.
LSI's Model 376 is a semi-automatic, tamp labeling system that labels flat sided products like boxes and the bottle tops of containers. The semi-automatic tamp labeling machine is compatible with the Series 20 Print & Apply Labeling Head and the Series 30 and Series 40 Apply Only Labeling Heads.
The Model 20.66 RFID, based on our reliable Series 20 Print & Apply platform, is LSI's solution for Printing, Encoding & Applying RFID labels and tags. The Model 20.66 RFID incorporates our unique Model 066 Reject Tamp Blow Applicator and is designed to accommodate the 15% to 20% "Bad Tag" yields typically found with RFID labels from most label converters. The latest RFID print engines from Zebra, Sato or Datamax can be incorporated into the Model 20.66 RFID to support EPC Class 1 (Alien) UHF RFID tags. Future upgrades for multi-protocol readers and Generation 2 tags will be made available as they are released by the printer manufacturers.
The Series 40 apply only labeling head can accommodate 5" and 7" web widths, 12" and 16" diameter unwind rolls and dispense speeds up to 1200" of label web per minute. The standard Series 40 labeling head is designed to fit almost any labeling application and is also easily converted to reach your desired labeling goals.
With no factory air required, the Compact 53c thermal transfer overprinter prints 53mm wide, 300 dpi logos, text and dynamic and 2D barcodes at up to 750 mm/s. Four ribbon save modes minimize running costs and downtime.
Top Cap Feeder for High Level Infeed Palletizers.
The Model 201SF packager is a state-of-the-art programmable controlled sealer that runs centerfold polyolefin, polyethylene, and PVC. The 201 is flexible, dependable, and easy to operate and maintain. It offers economical solutions for your bagging and shrink-wrapping needs, while providing superior performance, safety and ergonomics.
The Wexxar 5150 form, pack & seal combo systems were designed by combining the features of the BEL 505 semi-automatic case former and the BEL 150 pressure sensitive case taper to provide improved productivity, ergonomics and reduced costs. The forming, packing & sealing system eliminates cluttered packing lines and saves valuable floor space.
YAG laser coders create a clean permanent mark on an extensive selection of surfaces; including metals, foils and plastics. The D-Series YAG laser marking systems are an excellent choice for industrial and parts marking, as they are able to print in either a static or dynamic mode.
The Currie by Brenton Auto Load Pallet Dispenser reduces pallet handling by eliminating loading of individual pallets.
The e300 decorative label applicator is the cost-effective labeling solution from LSI. The e300 is available for applying labels to recessed areas, indexing lines and variable speed lines. The brightly lit, touch-screen display offers an easy user interface.
The SoloSeries 45/90 case marking printers are an economical case coding solution that prints up to 1" high characters. The case marking printer includes built-in date, time, count, and expiration autocodes.
The F-Series fiber laser marking equipment is a combination of the YAG laser coder technology with fiber optics. This combo has produced a smaller, easier to use, longer lasting laser marking system. The F-Series Laser Coders deliver faster precision marking at lower operating costs.
ID Technology's Model 250E label printer applicator is specially designed for use in harsh environments. A separate enclosure is not needed on this label printer applicator, as the printer applicator and enclosure are one.
Layer Sheet Feeder for High Level Infeed Palletizers.
LSI's Loose Loop Labeling System includes a tabletop printer to be used with a decorative labeler for high speed print and apply applications. This configuration allows for both print and apply as well as apply only label application.
The Eagle Series is an economically priced ink jet printing system that offers the best output quality in the industry for porous and non-porous surfaces.
The BEL 150 is a pressure sensitive, semi automatic case taper that can seal a variety of different case sizes at speeds up to 30 cases per minute. The DEKKA High Performance stainless steel tape head is a standard feature on the BEL 150.
Robotic Tire Painter System- Applies protective coatings to white sidewalls and raised lettering.
The BEL 505G3 is a semi-automatic case former / case erector that contains multiple packing stations. This multi-station feature allows case forming and packing from multiple positions, allowing the operator to pack from both sides and the rear. The design of the case forming / case erecting machine embodies the BEL 505 former / erector.
ID Technology offers a full range of pre-engineered fully automatic labeling systems for side apply, top apply, bottle wrap, and front and back applications.
The COMMUNICATOR II thermal transfer overprinter can print from speeds of 50mm per second to 1,400mm per second. The COMMUNICATOR II thermal transfer overprinter maintains high quality print during extreme accelerations and decelerations - operating with unprecedented precision while following the packaging machine's speed.
The Model 201PP-SF packager is the "pouch pack" version of the Model 201SF packager. With this sealing arrangement the horizontal seal is below the vertical seal thus making a "pouch" for products to be placed into. This model is utilized mainly for loose/bulk type products.
The 5252 form, pack & seal system comes together by combining the BEL 505 semi-automatic case former and the BEL 252 pressure sensitive case taper. This forming, packing & sealing system handles the process of erecting the case, taping the flaps, loading the case with product and sealing the top flaps.
The BEL 505G4 is an extremely compact, semi-automatic case packing system that integrates with a variety of case sealers, enabling one person to form, pack and seal corrugated cases in a single operation.
High speed rotary labeling systems offers precise label application and high speed stepper driven label applicator heads to ensure maximum productivity. The high speed rotary labeling system applies labels to products in wrap around, wipe-on, or front and back modes in the same turret.
The 250A apply only label applicator module automatically applies pre-printed labels and has the flexibility to upgrade to a new label printer applicator in the future.
The wrap labeling system from LSI is the Model 1500. The Model 1500 is designed for the labeling of straight sided cylindrical products. The wrap label applicator can apply a label to either a filled or empty container.
The BEL 150X is a semi automatic, pressure sensitive, case taper is an oversized version of the BEL 150 Model case taper. The added bonus to the oversized BEL150X is a larger frame and drive system to accommodate the large case capacity.
The BEL 507 is a semi-automatic case former / case erector that is tilted toward the operator for a more natural packing situation. This tilting case forming / case erecting equipment is ideal for packing lines in which the packing situation is awkward to the operator.
The Model 301SF vertical l bar sealer is a state-of-the-art programmable controlled, vertical l bar sealer that runs centerfold polyolefin, polyethylene, and PVC. The 301SF vertical l bar sealer can produce package sizes up to 18" x 24". It provides answers to customers who need the highest degree of performance, safety and ergonomics.
The WFPS 1250/1252 form, pack & seal system from Wexxar utilizes the combination of the WF10 omni-handed case former and the BEL 250 pressure sensitive case taper or the BEL 252 pressure sensitive case taper. This forming, packing & sealing solution come complete with a 3 foot loading and accumulation secion for an all-in-one packaging solution.
The Model 250 linerless label printer applicator uses labels with no liner which helps to drastically reduce waste. This is ideal for customers with multiple print and apply applicators, those facing mandatory recycling regulations, or those who are trying to reduce waste removal costs.
The Model 1600 front & back labeling system from LSI is a fully engineered and integrated label application machine that applies labels to the front and back of your product.
The BEL 507XL is an oversized semi-automatic tilting case former / case erector that is designed to provide a solution to the problem of erecting and packing large dimension, difficult to handle, corrugated boxes and cases. The case erecting / case forming equipment is simple to operate as well as adjust.
The BEL 180 is a semi automatic, random case taper that offers improved productivity as it conveniently self-adjusts to provide tape to various box sizes. The case taping equipment can also be fixed in position to seal a series of uniform size cases.
The Model 301PP-SF packager is the "pouch pack" version of the Model 301SF packager. With this sealing arrangement the horizontal seal is below the vertical seal thus making a "pouch" for products to be placed into. This model is utilized mainly for large batches of loose/bulk type products.
Wexxar offers the WFPS 2270 form, pack & seal system that combines the WF20-H fully automatic case former with the BEL 270 hot melt glue sealer to provide a fully automatic solution for forming, packing & sealing with glue. This forming, packing & sealing solution comes equiped with a 3 foot section for an all in one hand packing line.
ID Technology has designed a 3-Panel Label Printer Applicator specifically for production lines requiring the application of multiple labels to boxes or pallets at the same point in the production line. This unique label printer applicator allows one machine to do the work of three.
The BEL 185 is a semi automatic, pressure sensitive case taper that offers improved productivity as it conveniently self-adjusts to provide tape to various box sizes. The BEL 185 case taper allows one person to perform case forming, case packing, and case sealing into a single operation.
These label printer applicators are able to print barcodes, human-readable text, and graphics on the surface of a label and then encode the RFID chip embedded as part of the label.
The BEL 450 semi-automatic case former / case erector comes with a poly bag inserter. The poly bag inserter provides a cost effective alternative to manually inserting the poly bag liners into the cases. This case forming / case erecting equipment also has an optional weigh scale feature that helps with automating your packing lines.
The Model 501 Vertical L-Bar Heat Sealer benefits customers with substantial film savings on cylindrical products and products that are longer than they are wide - products like stacks of cups, bolts of cloth, curtain rods, etc.
This system features the WF30 Case Former with a motion-enhanced, servo Pin & Dome system and is integrated with a Pressure Sensitive Tape Case Sealer with built-in features that help operators overcome common challenges with continuous industrial duty. Standard items such as the color-coded changeover, Flex Speed System, enhanced touch screen for monitoring operations form and seal cases at speeds of up to 30 cases per minute.
The Model 450W is a high speed, wipe-on label printer applicator from ID Technology. The printer applicator is able to apply labels 30-40% faster than standard tamp style applicators.
The Series 1800 is LSI's line of labeling systems specifically designed for applying labels to the bottom of products, including boxes, trays, clamshells and more.
The BEL 250 is a fully automatic, pressure sensitive, case taper that is the smallest of any fully automatic case taper. The exclusive snap folder folds top flaps closed automatically without flap kicking arms. The DEKKA High Performance tape heads provide up to 25 cases per minute.
The BEL 451 semi-automatic case former / case erector comes with a poly bag inserter which is designed for manual bulk filling lines where a poly bag is required. The case forming / case erecting equipment is a cost effective way to provide your packaging line with ready, on demand supply of lined boxes or cases.
LSI can design and build a custom turnkey labeling system to suit your needs.
The BEL 252 fully automatic, pressure sensitive, case taper is a great selection for a packer looking to automate case sealing lines at a affordable cost. The case taper is unmatched in its compactness, safety, quality of construction, operating performance and value.
Wexxar/BEL provides their customers with the tools that are needed to ensure maintenance is performed for their automatic case former / case erector equipment. This toolbox contains these handy tools as well as a convenient place for them to be stored.
The BEL 290 is a fully automatic case sealer that precisely folds the major and minor flaps and automatically seals top and bottom. It is designed to meet the demands of heavy-duty applications and to minimize energy waste during slow or paused case production upstream.
DEKKA tape heads are precision constructed in high-quality stainless steel, and easily mount on top and bottom case sealing machines. DEKKA offers polyurethane wipe down rollers that are molded in one piece providing tough, longer lasting rollers requiring less maintenance.
Wexxar's ATL fully automatic tray former comes with self locking style doors. The self-lock style tray forms trays with two or four sided fold-overs. The ATL tray forming equipment is also able to handle other popular formats with tuck top flap, display trays, and integral dividers.
The Wexxar HTH Series Fully Automatic Tray Former is designed for cornerpost style trays. The HTH tray formers are simple to operate, with all mechanical drive machines, and programmable logic controlled. The HTH tray formers are capable of forming complex, special purpose designed trays at speeds to meet your demands.
Printable Version
